U Channel in 1mm mild steel

U Channel in 1mm mild steelFolded U channel in 1mm mild steel, base and wall size are + 1mm Press Brake folded for tight accurate bends. 1. 25 bend radius all available in 1000mm lengths Folded and shipped in the UK we can fold longer sections, we can quote if you need longer lengths Please note these are Guillotine cut but may have sharp edges, care should be take when handling any sheet steel. Variant WALL BASE THICKNESS

width is +/- 1mm

25mm width in total and approx

Custom engine bays

The 3 jig frame mounts each side for the factory production jigs are also included to keep them accurate

L Section folded steel lengths

Flat strips with no twist

Over folded L section

Has the return that goes under the pocket edge and is welded inside the door which you cant see in the pictures

I have left extra on the tunnel side should you need it but will need curving on the car if you do

obviously its a very rare floor and very few remain so if anyone does actually need them then please be aware I will make these to order only

They are around 3cms to the edge of the steel down the sides

Guillotined