Ribbed floor in 1mm mild steel - Large

Ribbed floor in 1mm mild steel - LargeOur slightly larger pressed ribbed steel panels in 1mm mild steel , approx. total size of 81. 5 CMS long (in direction of ribs) and 75. 5 CMS wide. 8 ribs over the width approx. 8. 5cms apart centre to centre and each rib around 2. 5 CMS wide (there are actually 9 ribs, i used to slice the last one off because its a bit shorter but to be honest it could be useful depending on your application so they ship with 9) Ribs are approx. 66. 5cms long and sit

Ideal for rust repairs on classic cars floor pans or boots

Long pressed ribbed steel panels in 1mm mild steel

Ideal for door skin repair where the edge needs to be tipped over another flange using a door skinning hammer

i used to slice the last one off because its a bit shorter but to be honest it could be useful depending on your application so they ship with 9)

classic cars firewalls or on custom car builds

actually I did about 3/4 of the front pan only and joined across the step and they fitted very well

Porsche 911 1964- 1968 SWB bumper brackets

7mm high and 7mm *** very Small top hat

drill and then welding in place

Rear Classic Mini van cargo floor edging strip

40mm or 50mm wide x 1mm thick x 1000mm length mild steel strips

total size of 81