PSM MAX 12KG Springs for PRO/ Competition Coilovers

PSM MAX 12KG Springs for PRO/ Competition CoiloversParts Shop MAX 12KG Springs for PRO Competition Coilovers 61mmID, 180mm long Listing is for: 1x Pair of Coilover springs Springs shorter than 6" must use helper springs sold separately. If you are putting 20KG plus on a McPherson strut car like S13 & BRZ, you will need helper springs. This will make sure you're not topping out your shocks, which will damage the shock. However, 20KG+ can be used on a big body Lexus and other double wishbone cars

Vacuum Station Slim 3 outlets specifications :

Bag Over Damper Air Spring

~ Forged Clamping rod end receiver

Any play there would be magnified at the wheel so it’s uncoated

~Standard Springs are lightweight Japanese linear springs with 20kg/mm front spring rate and 10kg rear spring rate (approx 1120 lb/in front and 560 lb/in rear) standard

provides maximum sensitivity and grip on the pedals

Delivered with AN-10 ORB fittings

The Mitsubishi 4cyl EVO X Motorsports Fuel Rail - Bolt-On is the best aftermarket fuel rail solution for your motorsports build

~ Insane amount of clearance for motor swaps

Helmet weights -

and it's downward facing hardware would run into the axle in our drop knuckle so the joint orientation is completely changed in our knuckle/arm set

this bracket allows you to adapt 2 piston Z32 twin turbo calipers to E46M3 rear rotors