50mm Base Starter Track 2.5m (10mm plastic nose)

50mm Base Starter Track 2.5m (10mm plastic nose)Renders Direct's box base range is particularly suited to EPS and mineral fibre insulated systems. The width of the base track being slightly wider than the insulation. They are supplied with a loose uPVC clip on nose to provide a finishing edge for 6 or 10mm render. The profiles are supplied mill finish. Aluminium Length 2. 5m Various sizes available Use in conjunction with the following products

Time saving application due to pre-assembly of the screw and plug

Data 8mm Scratch Coat – Ready to receive a Through Coloured Render The 1st pass should be applied to the primed substrate with a stainless steel trowel or spray pump

Application Temperature - +5°Cto 25°C for a minimum of 24 hours

add QS1 to the water and mix thoroughly

Provides a stop to the render at a change of finish or at a reveal

or within 150mm of ground level

strong and suitable for high levels of moisture and weathering

if added at the correct dose

>Made from recycled material

weather‑dependent

Moisture Resistance: Ideal for dry internal environments

Q: What is the coverage per bag