Ecorend SP15 Silicone Primer - 25kg Smoke Grey

Ecorend SP15 Silicone Primer - 25kg Smoke Greyecorend SP15 Silicone Primer is a ready to use, through coloured primer for use prior to the ecorend SR15 Silicone Thin Coat Render topcoat. The product has been developed to be highly vapour permeable and to control the suction of the substrate, thus preventing any substrate grin through, and can be applied by brush, roller or spray. Specifications Coverage Approx. 3. 2m2 per kg Application Temperature +5Cto 25C for a minimum of 24 hours Unit Size

Solid brick : 0

Micro Gobetis 3000 is a bonding coat for low or high porosity surfaces such as concrete

lightweight block and brick – Ecorend S10 Bonding Primer MIXING Ecorend FX4 One Coat Base should be mixed with clean water at a rate of approximately 4

installed above the damp proof courses or window and door reveals

ecorend SP15 Silicone Primer is a ready to use

Dry-stacked inter-locking modular wall units e

5mm thick wet on wet to the 1st pass

Base coats conforming to BS EN 13914-1

Through coloured

Applied by roller or brush

Avoid applications onto horizontal flat substrates or those with a backward incline as this may affect water run off and may have a tendency to hold moisture

specifically designed for use on difficult substrates to provide a key prior to the application of a cement basecoat or through coloured render